|
|
Senior centre in Ždár nad Sázavou
Brukner, Josef ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master thesis is to design home for the residential care of elderly and disabled people in Žďár nad Sázavou. It is designed as a three-storey building with a basement. There are technical facilities, in the basement. Canteen, doctor´s office, manager‘s office and reception are located on the first floor. Second and third floor contains common premises and residential units.building has a prefabricated reinforced concrete structural framework with mineral wool thermal insulation. It is covered with an extensive green roof. Piles are designed as the foundation. Partition wall is designed from plasterboard. The project and 3D rendering were carried out in Revit and Lumion software. All structures comply with the valid standards and regulations. The building site contains also an outdoor car park and a park.
|
|
|
The design of ETICS using insulation core made of aerated concrete
Machala, David ; Zach,, Jiří (referee) ; Drochytka, Rostislav (advisor)
This thesis deals with theoretical suggestions of contact self-supporting insulation system with an insulating core made of porous concrete. The text prepared knowledge about ETICS system, the properties of porous concrete are thoroughly described, including the history and the most often used technology for production of porous concrete. The conclusion is made by comparison of economical and thermal insulation criteria using optimizing calculation and the applicability criteria of proposed ETICS are stated.
|
|
| |
|
|
Study of reaction to fire tests for thermal insulating materials
Krivda, Antonín ; Novák, Vítězslav (referee) ; Sedlmajer, Martin (advisor)
This bachelor thesis deals with thermal insulation, it is fire resistance and reactions to fire. The thesis also approaches the testing of thermal insulation materials. In detail, it focuses on the Small flame test, Calorific value determination and the Flameproof test. The test methods were performed on insulators based on polystyrene and mineral wool. The literary research focuses on the fire safety of buildings that have been already insulated.
|
|
|
Family house Rb -3
Růžička, Jiří ; Sibilla, Luboš (referee) ; Vlček, Milan (advisor)
The project is design a house with a small establishment. The project includes the layout and the design of the house. The house has three floors with an attic and one basement floor. It is designed as a stand-alone. The first floor of the establishment of the background and the main entrance to the house. The rest of the house is designed for family living. This part is a utility room, basement and garage in the basement. Living room with household equipment is then in the upper part of the house. The house is run by two separate entrances with wheelchair access to the premises and the entrance to the garage in the basement. The house is designed as a brick building of brick masonry Porotherm in modular size 250 (125) mm with ceramic ceilings MIAKO a cylinder. Roofed by a gabled roof. The house is located on a private plot of 1200 m2 with built up area of 120 m2. The land is gently sloping.
|
|
|
The influence of the outdoor temperature on the properties of the reinforced layer in the implementation of ETICS
Novotný, Michal ; Gašparik,, Jozef (referee) ; Schmid, Pavel (referee) ; Sedlák,, Petr (referee) ; Lízal, Petr (advisor)
The trend in today's civil engineering are growing demands for quality and comfort constructed buildings and spaces in them. This trend causes a change in the approach to designing buildings and building new buildings. One of the main directions great importance is attached dedicated reconstruction of buildings and their technical adjustments to meet the ever increasing demands being norms and laws. One of the most monitored parameters are thermal-technical characteristics of objects - i.e. better quality means saving on heating costs. In this connection there is a big trend of the modern construction industry and building insulation, mainly ETICS systems. Dissertation focuses on the basic (reinforced) layer of the ETICS and examines the effect of low temperatures, acting on the matter in the implementation of the system, the properties of this layer. This coating is one of the key elements of the system, which more or less determines the quality and durability of the system. The first part deals with the current state of the problem and generally insulation systems, basic types and the advantages and disadvantages of these systems. In the main part of the work is solution focused work, its objectives and methodology for testing materials using laboratory tests and are mentioned outputs of experiments in terms of results. The final section addresses the evaluation of the data and results and output for construction practice. The theme of work was also addressed in the specific research. The works are also numerical and graphical attachments to records of experiments and calculations.
|
|
|
Home for seniors
Koláříková, Eliška ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master´s thesis is to design a Residential care home as smart building. It is situated in the centre of Křenovice near Brno. The master´s thesis is divided into three parts, first part presents design documentation, second part is focused on building services and the final part presents noise control in building. Residential care house is designed as two-storey building without basement with flat roof. On the first floor there is utility area for senior house and healthcare facility and on the second floor there are flats for seniors. Residential care house is built on footing. Load-bearing and non-load-bearing walls are designed from hollow bricks type THERM. External walls are insulated with mineral wool. The roofing of residential care house is made up of extensive green roof. The building services of the building includes two ground-water heat pumps with boreholes for heating and cooling, photovoltaic panels, HVAC, hot water cylinder and rainwater storage tank. The final part is focused on noise control in building. It is about acoustic in construction. Noise study is also included.
|
|
|
Environmentally Advanced Library
Burýšková, Jana ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The main aim of the Master‘s project is to design a library and a cafe in Příbram. The project is divided into three parts. The first part deals with architectural and structural design. The second with technical building services and the third with thermal imaging. The building has a basement and two above-ground floors. The building is founded on foundation strips. The building is designed with load-bearing brick walls and pre-stressed slabs Spiroll. The roof is a flat intensive green roof. The building envelope is insulated with mineral wool. In the building there is air a conditioning and a cooling system. As a heat source, a pressure-independent heat exchanger unit connected to the local hot water pipe will be used. A part of the electricity consumption is covered by photovoltaics. In the third part there are images from a thermal camera for some libraries. Imagines were evaluated if there are thermal bridges in the measured libraries. The project was carried out in the AutoCAD programme.
|
|
|
Development of a new self-supporting insulation system with respect to dynamic stress
Machala, David ; Frajt, Daniel (referee) ; Drochytka, Rostislav (advisor)
This diploma thesis deals with suggestion of self-supporting insulating system that can be used for objects which insulating is more or less complicated. In this thesis are theoretically processed information about insulation systems while focus is on their structure, composition and principle of operation. Further, there is theoretically designed self-supporting insulating system which is practically built after theoretically composed testing for finding its basic properties. The most appropriate process of realization is formulated at the end after evaluation of the individual tests.
|
|
|
Hotel "U Prehrady"
Černý, Dávid ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.
|
guest ::
